top of page

UM-X

UM-X

Fork Sensor Wide Groove-X Slot Photoelectric Switch

Volsentec

Fork Sensor Wide Groove-X Slot Photoelectric Switch UM-X SERIES

Sensing mode: U type through beam reflection

Model: Number of optical axes 1 optical axis

NPN UM-X30N

PNP UM-X30P

Sensing material: Opaque objects larger than Φ5mm

Output mode: Dark ON Light ON

Sensitivity adjustment: Fixed

Slot width: 30mm

Repeatability: Perpendicular to the detection axis: less than 0.5mm

Power supply: 10~30V DC

Curent consumption: 25 mA or less

Response Time: Less than 1ms

Output control:

<NPN open collector output>

●Maximum inflow current: 100mA

●Applied voltage: 30V DC or less (between output and 0V)

●Residual voltage: 2.5V or less (when inflow current is 100mA)

<PNP open collector output>

●Maximum inflow current: 100mA

●Applied voltage: 30V DC or less (between output and +V)

●Residual voltage: 2.5V or less (when the inflow current is 100mA)"

Circuit protection: Power supply reverse connection protection, output short circuit protection, overcurrent protection circuit, mutual interference prevention function

Indicatorlight: Action indicator light: red, power indicator light: green

Light source: Infrared LED (850nm)

Insulation impedance: 50MΩ or more (DC500V megger) between the charging unit and the outer shell

Automatic anti-interference function: Equipment

Withstand voltage: 1,500VAC, 50/60Hz 1min between charging unit and housing

Anti-vibration: 10~55 Hz double amplitude 1.5mm X,Y,Z directions 2H

Anti-impact: 500m/s²(50G) 3 times in each direction of X, Y, Z

Ambient illumination: Sunlight: 10000Lx Incandescent light: 3000Lx

Ambient temperature: Work:-25℃~+55℃ store:-30℃~+80℃iced forbidden

Ambient humidity: Operating: 35~85%RH (non-condensing) Storage: 35~95%RH (non-condensing)

Protection degree: IEC IP67

Connection: Lead wire type comes standard with 2 meters (oil-resistant wire)

Housing material: Shell: PBT+ABS

UM-X

bottom of page