Slot Series Photoelectric Switch UM-K25 SERIES

Model: UM-KN25, UM-KP25

Sensing mode: Through-beam type

Sensing distance: 5.2mm(slot width)

Sensing material: Opaque body 2×0.8mm or more

Power supply: 5-24VDC

Current consumption: <15mA

Circuit protection: Power supply reverse polarity protection, short circuit protection, overload protection

Output type: NPN-NO+NC, PNP-NO+NC

Output control:

NPN Load power supply voltage: DC5~24V, load current: 50mA or less, leakage current: 0.5mA or less, residual voltage: 1.0V or less (load current 50mA), residual voltage 0.4V or less (load current 5mA)

PNP Load power supply voltage: DC5~30V, load current: less than 50mA, leakage current: less than 0.5mA, residual voltage: less than 1.0V (load current 50mA), residual voltage less than 0.4V (load current 5mA)

Response frequency: >1KHz

Indicator light: Red indicator light

Light source: Infrared light emitting diode 940nm

Ambient illumination: Sunlight: 10000Lx Incandescent light: 3000Lx

Ambient temperature: Work:-25℃~+55℃ store:-30℃~+80℃iced forbidden

Ambient humidity: Operating: 35~85%RH Storage: 35~95%RH (no freezing, no condensation)

Anti-vibration: 10-55Hz, complex amplitude 1.5mm X, Y, Z direction 2H

Withstand voltage: 1000VAC, 50/60Hz 1min between charging unit and housing

Protection degree: IEC specification IP65

Connection: Lead wire type (standard 1 meter)

Housing material: Housing: ABS Lens: PMMA

Dimension: 23.9*12.3*6mm