ESF-T30NA-PQ-01
ESF-T30NA-PQ-01
Through-beam small photoelectric, 300mm
NPN Photoelectric Sensor
ESF-T30NA
Sensing mode: Through beam reflection
Model: NPN, ESF-T30NA
Sensing distance: 30cm
Sensing target: >φ2mm Opaque material
Output type: NPN/PNP,NO,NC set
Differential travel: 10%of set distance max
Light source: Red light 660 nm
Power supply: DC12~24V, impulse (P-P) <10%/DC12~24V pulsation (P-P) less than 10%
Curent consumption: Emitter ≤ 20mA Receiver ≤ 15mA
Circuit protection: Short-aircuit protecion,reverse connection protection
Response Time: <1ms
Ambient illumination: Sunlight:10,000Lx lamplight3,000Lx
Ambient temperature: Work:-25℃~+55℃ iced forbidden Store:-40℃~+70℃ dewde forbidden
Ambient humidity: Work:35~85%RH store:35~95%RH,dewde forbidden
Insulation resistance: 20MΩ or more (DC500V megger) Between the charging unit and the outer shell
Dielectric strength: 1000VAC,50/60Hz 1min
Anti-vibration: 10~55Hz double-amplitude 1.5mm,X,Y,Z(2H)/10~55 Hz
Anti-impact: 500m/S²X,Y,Z3 times
Protection degree: IEC IP65
Connection method: Cable2m-PVC-terminal
Indicator light: Output:Yellow LED; LED/Power:Green LED
Housing material: Housing: PBT; Lens: Optical PMMA; /Housing:PBT Lens:PMMA
Volsentec
PQ-01
Model: PQ-01
Type: Thrubeam Short-detecting distance
Detecting distance: 100 mm 3.94"
Light source: Infrared LED
Detectable object: 1 mm 0.04" dia. min. opaque: materials
Minimum detectable object: 0.5 mm 0.02" dia. copper wire
Response time: 1 ms max.
Operation mode: DARK-ON *1
Indicator lamp: Output: Red LED
Control output: NPN: 100 mA max. (40 V max.), Residual voltage: 1 V max. *2
Protection circuit: Reversed polarity, overcurrent protection, surge absorber
Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption: 30 mA or less
Enclosure rating: IP64
Ambient light: Incandescent lamp: 3,000 lux max., Sunlight: 10,000 lux max.
Ambient temperature: -20 to +55 °C -4 to 131 °F (No freezing)
Relative humidity: 35 to 85 % RH (No condensation)
Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Shock resistance: 500 m/s2, 3 times in each of the X, Y, and Z directions
Material: Amplifi er: Polysulfone, Sensor head： Polyarylate
Weight: Approx. 48 g (including 2m 6.6' cable)