FM-N31-FS-V21R
FM-N31-FS-V21R
Same of Dual digital display optical fiber amplifier, NPN output
Optical Fiber Amplifier
FM-N31
Sensing mode: Reflection
Model: FM-N31
Output mode: NPN
Specification: 30.3mmx9.8mmx71.8mm
Light source: Red 660nm (red light emitting diode)
Response Time: 100μs(HIGH SPEED)/250μS(FINE)/1ms(TURBO)16ms(MEGA)
Output Option: LIGHT-ON/DARK-ON
Sensing mode: Optical intensity(detection,automatic sensitivity tracking function
Output control: "NPN Open Couector24V,Maximum 100mA,
Residual Voltage:Maximum 1V"
Power supply: DC12~24V,impulse(P-P)<10%
Current consumption: "Maximum 750mW(Maximum current 24V,31mA,Maximum current12V:40mA)
Power-down mode:Maimum current:580mW(Maimum current:24V,24mA;Maximum Current:12V,28mA)"
Ambient temperature: -25℃~+55℃,with no icing or condensation
Ambient humidity: 35~85%RH dewde forbidden
Ambient illumination: Sunlight:30000Lux max;Incandescent lamp:20000Lux
Anti-vibration: Double amplitude for 2 hours each inX,Y and Z directions
Anti-impact: 500m/S²,X,Y,Z(3 times)
Housing material: PC
Connection: Cable2m-PU
Weight: 80g
Volsentec
FS-V21R
FS-V21R
Main unit, NPN
Light source LED: Red LED
Response time: 250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)
Output selection: Light-ON/Dark-ON selectable
Indicator lamp:
Operation indicator: Red LED
Dual digital monitor: Dual 7-segment display
[Preset Value (4-digit green LED indicator) and Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 65,520; Excess gain: 0 P to 999 P]
Hold function: Possible to display both peak and bottom hold values.
Bar LED monitor: Possible to display together with Current Value
Excess gain displayed (85 to 115 % in 7 steps)
Detection mode: Light intensity/rising edge/falling edge
Timer function Mode: Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable
Timer Variable range:
1 to 500 ms
[1 to 30 ms (in 1 ms increments), 30 to 50 ms (in 2 ms increments), 50 to 200 ms (in 10 ms increments), 200 to 500 ms (in 50 ms increments)]
Control output: 100 mA max. (40VDC max), Residual voltage: 1Vmax.